Since energy costs have increased, we increasingly get asked whether a wire guard on a fan is necessary. The reasoning that a fan without a wire guard experiences less resistance, and thus becomes more energy efficient, is true. However, it is not always allowed or advisable to remove a wire guard.
Safety regulations often mandate the use of wire guards to protect both the equipment and personnel from accidental contact with the moving parts. Additionally, wire guards can prevent debris from entering the fan, which could cause damage or reduce its efficiency over time. We are happy to explain the considerations in detail so you can make an informed choice that balances energy efficiency with safety and operational requirements.
In some cases it is mandatory to protect the fan impeller with a wire guard. This is stipulated in various regulations and legislation such as ISO, CE (Europe) and OSHA (USA). Thus, local regulations may differ from the International Standard set forth in the ISO standard. However, we see a trend of gradually adopting the ISO standard worldwide. This stipulates that fans below 2.7 meters (Service Level) must have a wire guard. The service level is determined by regular operations. Harvesting the crop in a horticultural greenhouse which is usually done on an aerial work platform increases the working height to the level at which harvesting takes place. Incidental maintenance with a ladder is not considered regular work, and therefore does not increase the working height.
What kind of wire guards are used depends on local laws and regulations. We supply both OSHA and CE wire guards. OSHA wire guards use a fixed mesh size of 0.5 inches. CE wire guards have a variable mesh size determined by the distance between the wire guard and the fan impeller. The further away the wire guard is from the fan, the coarser the wire guard is allowed to be. However, there is one exception. When a fan is not freely accessible, such as because it is installed deep in a pipe, a wire guard is not required.
There are also cases where a wire guard is not required but is still desirable. Consider situations where there is a high probability that animals can reach the fan. To protect both the animals and the fan, a wire guard is recommended in these cases. Should it occasionally happen that something passes the fan, it is good to know that in such a case the blades of the fan can break off, protecting the fan motor from imbalance. This is an important advantage of plastic impellers over metal impellers because they bend, resulting in imbalance. New blades or complete impellers can be ordered through our customer service at low cost. Depending on the position of the fan, these can often be replaced within minutes.
Finally, the reason to remove the wire guards: Energy savings. Because a fan without a wire guard encounters less resistance, it will absorb less power AND move more air. This can make a fan up to 20% more efficient. Usually this is 5 to 10%, which is highly dependent on a number of factors:
We explain using two examples. A Horizontal Circulation Fan often used in the horticultural sector, and a Panel Fan often used for ventilation in industrial halls and stables.
The fan is used for circulation applications. Because of this, we assume a static pressure of 0 Pa in this example.
Removing the wire guards makes the Horizontal Circulation Fan 15.1% more efficient in this case.
The fan is typically used for ventilation applications. Because of this, we keep a static pressure of 30 Pa in this example.
Removing the wire guard makes the Panel Fan 5.0% more efficient in this case.
If possible, install fans without wire guards. This improves the efficiency of the fan and can provide a benefit of up to 20%. Do check that safety is not compromised, however, and that you comply with local regulations in doing so.
Curious about the possibilities for your application? Then contact one of our specialists.